INPA BMW Software is for BMW diagnostic & coding software, INPA BMW Software work with INPA/Ediabas K+DCAN USB Interface professional performance than OBD2 Scanners, support BMW E-Chassis vehicles from 1998 to 2008. Here VXDAS.com share all about INPA BMW software & INPA K+DCAN hardware as follow. Our K+DCAN USB Interface is based on the FTDI FT232RL USB to Serial Converter chipset, this chipset is one of the most reliable and stable chipsets available and have the best and widest driver support as well. We recommend you to always download the latest certified drivers directly from the FTDI webpage at www.ftdichip.com.

INPA K+DCAN Full OBD2 Diagnostic Tool with FT232RL Chip for BMW

Unlock Version Auto Scanner for BMW with USB Cable and CD Driver

BMW Scanner V2.20 K+D BMW Synchronization DME/DDE and CAS Tool

BMW INPA & Ediabas 5.0.2 full English version for BMW from 1998 to 2008 installation tutorial here.

The software CD will come to you with the INPA K+CAN interface, only €17 with free shipping, enjoy shopping here:

This New BMW INPA K+CAN is great designed With FT232RQ Chip has a Switch which turns LEFT is for 7 pin, RIGHT is for 8 pin (8 pin is for K-LINE protocol, old DCAN cable cannot do this).

Note: the guidance especially for Windows XP users.

Before installing, delete all version of INPA-ADS from your computer.

Insert CD to disk E: and open it, there will be a file named “INPACANinstall” which will guide you how to install in detail.

Step1: Open “01_Step1” file in the root of CD disk and copy folder “EC-APPS” onto disk C:

Step2:Run the file “01_Step1NFSEntpacktdisk1SETUP.EXE”

Choose “Windows XP” and click next

Choose “User Mode” and click next

Choose 1 -> OBD ->“Kein API-TRACE” ->“Kein IFH-TRACE” ->“Komfort(.IPO)” and click next

Then press any key to continue

This step Complete

Step3: Run the file “02_Setup2INSTALLInstprog.exe”

Choose English, press continue

While choosing the HDD disk C: for initial setup, do not change, the installation must be on drive C: only, press continue

Choose configuration “BMW Group Rectification Programs UK” and press continue

Activate all spare boxes with:

EDIABAS 6.4.3 – UPDATE

INPA 5.0.1- UPDATE

NCS Expert 3.0.8 – Complete

Press continue to start installation and press End to exit the installation

Step4: Run the file “03_Setup3INSTALLInstprog.exe”

-Choose English, press continue, press continue again

-While choosing the HDD disk C: for initial setup, do not change, the installation must be on drive C: only, press continue

Bmw Inpa K+dcan

-Choose configuration “BMW Group Rectification Programs UK” and press continue

-Activate all spare boxes with:

INPA 5.0.1- UPDATE

NCS Expert 3.0.8 – UPDATE

Bmw Inpa K 2bdcan Software Download Windows 10

Press continue to start installation and press End to exit the installation

Step5:

Find the file C:EC-APPSINPACFGDAT named “inpa.ini” and replace it with the file “inpa.ini” that is in the root directory of CD disk

Step6: Plug the adapter into spare USB-Port and install drivers manually

Copy the “Driver_D_CAN_USB” file onto disk C:

Choose install from a list of specific location

Select the folder “Driver_D_CAN_USB”

You may install the same driver again

Complete driver installation

Then Change the number of COM-port to the value from 5 to 1, also change the value of Latency Timer from 16 to 1.

Step7: open disk C:EDIABASBINEdiabas.ini

In the file “EDIABAS.ini”

“Interface = STD:OBD” must be choosen

Step8: in the file C:WindowsOBD.INI, put the number of USB-COM-port to the value

Step9: Run the file “Driver_D_CAN_USBOBDSetup.exe”

After doing these, you should RE-BOOT the computerFree autodesk inventor software.

Step10: test

–Connect BMW car with laptop via INPA cable ( via USB Port and OBDII port)

-Turn ignition on

-Run the INPA from: C:EC-APPSINPABINinpaload.exe

-Choose the model of BMW and type of modells you want to see

-Close the soft and disconnect the INPA cable from USB Port each time you change the car connect.

Done!